Tips
- All boards have been enamelled with epoxy polyester powder Dark Grey Shade BS632. Steel screws and component parts are zink plated.
- A range of TPN anti-vandal Ryefield boards have been produced with in conjunction with 24/7 (LE) Engineers and local authorities.
- Single phase Ryefiled boards are also available on the market with 7 to 12 SPN fuseways. Rated fused short circuit current 50kA at 415V with maximum rating of busbar - 400A as standard.
23 Way Ryefield Distribution Board
 |
£1378.00 Complete with 60A HRC fuses £1500.00 Complete with 100A HRC fuses |
Product image are for illustrative purposes only. Shown TPN 12 Way Distribution Board.
London Electricity pattern TPN service type distribution board with Mul-T-Lock system incorporating GEC Henley series 7 fuse units. HRC fuses fitted and included in price.
Cases fabricated from 18g steel sheets. Lift off hinged covers with padlocking attachment and Multilock. Back of cases drilled and embossed for wall fixing.
- 23 Ways - 8x8x7;
- 60 amp or 100 amp service type fuse units;
- Standard main brass clamps adjustable to accept 25mm to 120mm stranded conductors;
- Brass neutral with main clamp and pinching screw circuit terminals - one per fuse unit;
- Brass earth block with pinching screw terminals and PME link;
- Plain removable plates top and bottom as standard;
- Standard busbar current rating 400 amps maximum;
- Size: WxDxH 815x500x180;
Extras
- Main clamps double bored for lopped conductors up to 120mm stranded or solid
- Main clamps single bored for conductors up to 240mm stranded or solid
- Main clamps electro tinned or serrated for aluminium conductors;
- Top and bottom plates drilled, split and fitted with grommets or hardwood or non ferrous plates;
- Deep cases for double rising conductors with dis board connected to front set of conductors;
Send your request
If you have any queries please submit them in the form below.
© 2013 All rights reserved.